AMI-SIL® (AS) PSA-Backed Cloth

AMI-SIL® (AS) PSA-Backed heat resistant cloth is made from a minimum 96% pure amorphous silica cloth with a pressure-sensitive adhesive back. It is rated to 300°F (150°C).

We do not stock samples of this product at this time.

Download SDS
  • Made in the USA Flag
  • Product Specs
  • Product Line Information
  • Data Sheets
Product TypeProduct NumberAvailable Widths (inches)Standard Put-upThickness (inches)PSASeriesUnit of MeasureFabric TypeCont. Op. Temp.Notes3rd Party Spec.Data Sheets
18 oz PSA backed clothAS1800 PSA

60, 36

50 YD/RL

0.030, 0.04, 0.05

Yes

AS

YDS

AMI-SIL (Silica)

300°F (148°C)

300 Deg F/150 Deg C temperature resistance reflects limitation of adhesive for aluminization/PSA

MIL-C-24576

Data Sheet
36 oz PSA backed clothAS3600 PSA

60, 36

50 YD/RL

0.030, 0.04, 0.05

Yes

AS

YDS

AMI-SIL (Silica)

300°F (148°C)

300 Deg F/150 Deg C temperature resistance reflects limitation of adhesive for aluminization/PSA

MIL-C-24576

Data Sheet

AMI-SILThe ultimate in ceramic-free high temperature protection!

Used for Welding/Cutting Protection, Molten Metal Splash Protection, Heat and Flame Shielding, Stress Relief, Insulation, Hose and Cable Protection, Emergency Fire Blankets, Tadpole Tapes, Oven Door Seals, Gasketing and more. AMI-SIL® is made of 96% silica, and does not contain asbestos or ceramic.

  • Continuous protection to 1800°F (980°C)
  • Melting point in excess of 3000°F (1650°C)
  • Minimum 96% amorphous silica content
  • Safe substitute for ceramic in refractory applications
  • Optimal choice for welding protection
  • Meets military specification MIL-C-24576
  • Flexible and chemical resistant
  • Low thermal conductivity
  • Low halogens and soluble chlorides
  • Aluminization process consists of an aluminized polyester film, which is added for reflective capabilities only
  • Available in natural

Products

Product NumberData Sheets
AS1800 PSAData Sheet
AS3600 PSAData Sheet