AMI-SIL® (CAS) (AS) Cloth

AMI-SIL® (AS) and (CAS) hot work fabrics are made from a minimum 96% pure amorphous silica cloth and are rated to 1800°F (980°C). AMI-SIL is the product of choice for use in the fabrication of removable insulation pads or insulation jackets required for components in extremely hot environments.

Sample available in13 oz and 24 oz plain only.

Download SDS
  • Made in the USA
  • Product Specs
  • Product Line Information
  • Data Sheets
Product TypeProduct NumberStandard Put-upUnit of MeasureFabric TypeCont. Op. Temp.Available Widths (inches)SeriesWeight (oz. per sq. yd)Nominal Thickness (inches)3rd Party Spec.Data Sheets
AS2400AR 24 oz, Abrasion Resistant®AS2400AR

50 YD/RL

YD

AMI-SIL (Silica)

1800°F (980°C)

36, 60

AS, CAS

24

0.04

ANSI/FM 4950 – FM Approved

Data Sheet
AS2400 24 oz, PlainAS2400

50 YD/RL

YD

AMI-SIL (Silica)

1800°F (980°C)

36, 60

AS, CAS

24

0.04

ANSI/FM 4950 – FM Approved, USCG 164.009-5(F) Test for Incombustibility

Data Sheet
AS3600AR 36 oz, Abrasion ResistantAS3600AR

50 YD/RL

YD

AMI-SIL (Silica)

1800°F (980°C)

36, 60

AS, CAS

36

0.054

ANSI/FM 4950 – FM Approved

Data Sheet
AS3600 36 oz, PlainAS3600

50 YD/RL

YD

AMI-SIL (Silica)

1800°F (980°C)

36, 60

AS, CAS

36

0.054

ANSI/FM 4950 – FM Approved, USCG 164.009-5(F) Test for Incombustibility, MIL-C-24576

Data Sheet
CAS1200 13 oz, PlainCAS1200

50 YD/RL

YD

AMI-SIL (Silica)

1800°F (980°C)

36, 60

AS, CAS

13

0.028

ANSI/FM 4950 – FM Approved, USCG 164.009-5(F) Test for Incombustibility

Data Sheet

AMI-SILThe ultimate in ceramic-free high temperature protection!

Used for Welding/Cutting Protection, Molten Metal Splash Protection, Heat and Flame Shielding, Stress Relief, Insulation, Hose and Cable Protection, Emergency Fire Blankets, Tadpole Tapes, Oven Door Seals, Gasketing and more. AMI-SIL® is made of 96% silica, and does not contain asbestos or ceramic.

  • Continuous protection to 1800°F (980°C)
  • Melting point in excess of 3000°F (1650°C)
  • Minimum 96% amorphous silica content
  • Safe substitute for ceramic in refractory applications
  • Optimal choice for welding protection
  • Meets military specification MIL-C-24576
  • Flexible and chemical resistant
  • Low thermal conductivity
  • Low halogens and soluble chlorides
  • Aluminization process consists of an aluminized polyester film, which is added for reflective capabilities only
  • Available in natural

Products

Product NumberData Sheets
AS2400ARData Sheet
AS2400Data Sheet
AS3600ARData Sheet
AS3600Data Sheet
CAS1200Data Sheet