AMI-SIL® (AS) Tape Woven and Slit PSA

AMI-SIL® (AS) with PSA–Pressure Sensitive Adhesive–is AMI’s high temperature insulation tape designed for easy cohesion and installation for pipe wrapping applications.

Download SDS
  • Made in the USA
  • Product Specs
  • Product Line Information
  • Data Sheets
Product TypeProduct NumberFabric TypeCont. Op. Temp.PSA (Pressure Sensitive Adhesive Backed)Series3rd Party Spec.Nominal Thickness (inches)Nominal Width (inches)Standard Put-upFabric FinishData Sheets
.030"AS18-PSA

AMI-FLEX (Aramid/Fiberglass), AMI-SIL (Silica)

300°F (148°C)

Yes

AS-PSA

USCG 164.009-5(F) Test for Incombustibility

0.03

1-1/2 thru 5

150 FT/RL, 100 FT/RL

Satin

Data Sheet
.054"AS36-PSA

AMI-FLEX (Aramid/Fiberglass), AMI-SIL (Silica)

300°F (148°C)

Yes

AS-PSA

USCG 164.009-5(F) Test for Incombustibility

0.05

1-1/2 thru 7

75 FT/RL

Plain

Data Sheet

AMI-SILThe ultimate in ceramic-free high temperature protection!

Used for Welding/Cutting Protection, Molten Metal Splash Protection, Heat and Flame Shielding, Stress Relief, Insulation, Hose and Cable Protection, Emergency Fire Blankets, Tadpole Tapes, Oven Door Seals, Gasketing and more. AMI-SIL® is made of 96% silica, and does not contain asbestos or ceramic.

  • Continuous protection to 1800°F (980°C)
  • Melting point in excess of 3000°F (1650°C)
  • Minimum 96% amorphous silica content
  • Safe substitute for ceramic in refractory applications
  • Optimal choice for welding protection
  • Meets military specification MIL-C-24576
  • Flexible and chemical resistant
  • Low thermal conductivity
  • Low halogens and soluble chlorides
  • Aluminization process consists of an aluminized polyester film, which is added for reflective capabilities only
  • Available in natural

Products

Product NumberData Sheets
AS18-PSAData Sheet
AS36-PSAData Sheet