AMI-SIL® (SAS) Cloth
AMI-SIL® (SAS) welding blanket is made from 96% silica (minimum) cloth with a cured silicone rubber on one side. The herringbone weave hot work textile is rated to 1800°F (980°C). FM approved hot work fabrics are now required by NFPA 51B.
Download SDS
- Product Specs
- Product Line Information
- Data Sheets
| Product Type | Product Number | Fabric Type | Cont. Op. Temp. | FM Approved | Weight (oz. per sq. yd) | Performance Category | Series | Thickness (inches) | Available Widths (inches) | Application Environment | Application Rating Key | Unit of Measure | Data Sheets |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SAS2400-1 29 oz | SAS2400-1 | AMI-SIL (Silica) | 1800°F (980°C) | Yes | 29 | Blanket | SAS | 0.047 | 60, 36 | Horizontal, Indoor, Outdoor, Vertical | 09 Best | YDS | Data Sheet |
Show All
The ultimate in ceramic-free high temperature protection!
Used for Welding/Cutting Protection, Molten Metal Splash Protection, Heat and Flame Shielding, Stress Relief, Insulation, Hose and Cable Protection, Emergency Fire Blankets, Tadpole Tapes, Oven Door Seals, Gasketing and more. AMI-SIL® is made of 96% silica, and does not contain asbestos or ceramic.
- Continuous protection to 1800°F (980°C)
- Melting point in excess of 3000°F (1650°C)
- Minimum 96% amorphous silica content
- Safe substitute for ceramic in refractory applications
- Optimal choice for welding protection
- Meets military specification MIL-C-24576
- Flexible and chemical resistant
- Low thermal conductivity
- Low halogens and soluble chlorides
- Aluminization process consists of an aluminized polyester film, which is added for reflective capabilities only
- Available in natural
Products
| Product Number | Data Sheets |
|---|---|
| SAS2400-1 | Data Sheet |