AMI-FAB (TGL) Sewing Thread PTFE-Coated

AMI-FAB® (TGL) Sewing Thread PTFE-Coated

AMI-FAB® (TGL) is a 100% fiberglass thread coated with, non-stick PTFE that is used in the fabrication of custom removable insulation jackets or pads. The PTFE coating limits the temperature rating to 500°F (260°C).

Please Note: We do not sell thread as a standalone product, it is sold as an accessory to our fabrication customers.

Download SDS

Get a Quote

Product Specs
Product Line Information
Data Sheets

Product Type	Product Number	Unit of Measure	Standard Put-up	Temperature Resistance (Deg F)	Weight Per Cone (lbs)	Average Breaking Strength (lbs)	Coating	Nominal Diameter (inches)	Approx. Yield (YDS/LB)	Data Sheets
Sewing Thread PTFE-Coated 0.014"	TGL12	LB	2 LB Spools	PTFE: 500, Fiberglass: 1000	2	14	13-16% Teflon°	0.020, 0.017, 0.014	3,000	Data Sheet
Sewing Thread PTFE-Coated 0.017"	TGL18	LB	2 LB Spools	PTFE: 500, Fiberglass: 1000	2	14	13-16% PTFE	0.020, 0.017, 0.014	2,000	Data Sheet
Sewing Thread PTFE-Coated 0.020"	TGL24	LB	2 LB Spools	PTFE: 500, Fiberglass: 1000	2	27	13-16% PTFE	0.020, 0.017, 0.014	1,500	Data Sheet

A full selection of extreme temperature fabrics and accessories.

Need removable insulation pads?
According to the U.S. Department of Energy, removable and reusable insulation pads can save up to 5% on your energy bill. Our extensive AMI-FAB® removable insulation system includes all the components you need for custom insulation pad fabrication. Select from a wide range of extreme temperature products, including:

Silicone coated fabrics for water, oil and heat resistance
PTFE coated fabrics for chemical resistance
Fiberglass mat
Silica thread
Wire mesh
Drawstring
Hardware

Products

Energy Saving Ever Green® Cut ‘n Wrap™ (EverGreen Cut n Wrap)
Cloth
Thread
Drawstring
Wire Mesh
Tape
Accessories
Mat

Product Number	Data Sheets
TGL12	Data Sheet
TGL18	Data Sheet
TGL24	Data Sheet