AMI-SIL® (AS) Abrasion Resistant Cloth

AMI-SIL® AR hot work fabrics are made from a minimum 96% pure amorphous silica cloth and are rated to 1800°F (980°C) for the ultimate in high temperature protection. Abrasion Resistant coatings added for durability.  Product color – orange.

Sample available in 18.0 oz and 36 oz only.

Download SDS
  • Made in the USA Flag
  • Product Specs
  • Product Line Information
  • Data Sheets
Product TypeProduct NumberFabric TypeWeight (oz. per sq. yd)Standard Put-upPSASeriesUnit of MeasureCont. Op. Temp.NotesAvailable OptionsThickness (inches)Available Widths (inches)Data Sheets
(AS) Abrasion Resistant Cloth 18.0 ozAS1800FAR

AMI-SIL (Silica)

12.5, 17, 18, 24, 40, 36

50 YD/RL

Yes

AS, CAS

YDS

1800°F (980°C), 300°F (148°C)

300 Deg F/150 Deg C temperature resistance reflects limitation of adhesive for aluminization/PSA

AR

Data Sheet
(AS) Abrasion Resistant Cloth 24.0 ozAS2400AR

AMI-SIL (Silica)

12.5, 17, 18, 24, 40, 36

50 YD/RL

Yes

AS, CAS

YDS

1800°F (980°C), 300°F (148°C)

300 Deg F/150 Deg C temperature resistance reflects limitation of adhesive for aluminization/PSA

AR

Data Sheet
(AS) Abrasion Resistant Cloth 36.0 ozAS3600AR

AMI-SIL (Silica)

12.5, 17, 18, 24, 40, 36

50 YD/RL

Yes

AS, CAS

YDS

1800°F (980°C), 300°F (148°C)

300 Deg F/150 Deg C temperature resistance reflects limitation of adhesive for aluminization/PSA

AR

Data Sheet

AMI-SILThe ultimate in ceramic-free high temperature protection!

Used for Welding/Cutting Protection, Molten Metal Splash Protection, Heat and Flame Shielding, Stress Relief, Insulation, Hose and Cable Protection, Emergency Fire Blankets, Tadpole Tapes, Oven Door Seals, Gasketing and more. AMI-SIL® is made of 96% silica, and does not contain asbestos or ceramic.

  • Continuous protection to 1800°F (980°C)
  • Melting point in excess of 3000°F (1650°C)
  • Minimum 96% amorphous silica content
  • Safe substitute for ceramic in refractory applications
  • Optimal choice for welding protection
  • Meets military specification MIL-C-24576
  • Flexible and chemical resistant
  • Low thermal conductivity
  • Low halogens and soluble chlorides
  • Aluminization process consists of an aluminized polyester film, which is added for reflective capabilities only
  • Available in natural

Products

Product NumberData Sheets
AS1800FARData Sheet
AS2400ARData Sheet
AS3600ARData Sheet